| Author |
Message |
    
gerald j. dombrowski
Member
Username: jerry101
Post Number: 39
Registered: 09-2006
| | Posted on Friday, November 06, 2009 - 12:43 pm: | 
|
i have a 1979 evinrude 6 hsp outboard model#6905e,serial #j0001151 that takes nine or ten pulls to start when sitting for a long time or just sitting for ten minutes after running for an hour or so ,when starting i try to start with just a little more gas other than using the choke ,but it will not start till i close the choke part ways,,,,what could be the problem-i've installed a new power pack ,new coils,and new fuel pump,carburator was cleaned and reinstalled,new plugs ????????.............thanks |
jwbmarine
Senior Member
Username: jwbmarine
Post Number: 5105
Registered: 11-2005
| | Posted on Friday, November 06, 2009 - 02:25 pm: |
|
sounds like its running a lil lean,..enrichen the idle screw to the left 1/4 turn or so and try.,does it idle good,..once started? |
|
