| Author |
Message |
    
james Kinkade
New member
Username: davey_jones
Post Number: 1
Registered: 11-2009
| | Posted on Wednesday, November 04, 2009 - 05:34 pm: | 
|
Hello all,
I have a 25 ft trophy with a rebuilt 175 ocean pro that needs controls(top mounted), wiring harness and gauges. I'm looking at the brp binnacle with built in key switch. With the right wiring harness will this have all the alarms, choke switch and ability to plug in digital gauges? Any better options or ideas? I'm looking for the "easiest and simplest" and would like to have a nice set up.
Any help or suggestions would be much appreciated,
thanks! |
jwbmarine
Senior Member
Username: jwbmarine
Post Number: 5091
Registered: 11-2005
| | Posted on Wednesday, November 04, 2009 - 07:20 pm: |
|
yes,it will,...go w/the brp binnacle mount,and system ck gauges.....on this rebuild,...new VRO/OMS pump,or disconnected....? |
james Kinkade
New member
Username: davey_jones
Post Number: 2
Registered: 11-2009
| | Posted on Wednesday, November 04, 2009 - 07:36 pm: |
|
not sure if it has a new vro pump but it is not disconnected and hopefully it has been checked. |
Morten Ringvold
Senior Member
Username: haffiman37
Post Number: 4336
Registered: 04-2006
| | Posted on Wednesday, November 04, 2009 - 07:51 pm: |
|
You do not mention which 175.
The old cross or the 'new' OIS 60 Looper?
If the old harness, might be difficult to get new remote without using an adapter harness. If the 'new' harness, no problems. |
jwbmarine
Senior Member
Username: jwbmarine
Post Number: 5093
Registered: 11-2005
| | Posted on Thursday, November 05, 2009 - 03:28 pm: |
|
175 ocean pro --- i took this to mean 60 degree..... |
Cliff Casavant
Advanced Member
Username: chickenfry
Post Number: 166
Registered: 05-2009
| | Posted on Friday, November 06, 2009 - 02:30 pm: |
|
contact teleflex 1 217 324 9428 |
