|
| Author |
Message |
    
Steve Lane
Member
Username: fulltankforsure
Post Number: 7
Registered: 07-2009
| | Posted on Saturday, October 24, 2009 - 01:30 pm: | 
|
I have a Commercial Evinrude 25hp XL shaft,,,SU25RSZ. I belive it's an 85. I want to shorten the shaft and have found a 1975 25 Evinruide (25502B). Does anyone know if the driveshaft, water tube, and connector are interchangeable on these?
Thanks! |
VicS
Advanced Member
Username: vics
Post Number: 731
Registered: 05-2008
| | Posted on Saturday, October 24, 2009 - 04:55 pm: |
|
I make 25RSZ a 1988 model.
Take a look at the parts diagrams in the parts catalog and the parts numbers for a non commercial 1988 and a 1975 and i think you'll conclude that the parts are probably not interchangable, at least not if the 25RSZ is the same as a 1988 non commercial model
http://shop2.evinrude.com/ext/index.aspx?s1=fe734c8d0d019e57d43e69c77c477f81 |
Steve Lane
Member
Username: fulltankforsure
Post Number: 8
Registered: 07-2009
| | Posted on Saturday, October 24, 2009 - 06:26 pm: |
|
Thanks all.
I did research things from both links I received and yes, mine is am 88 and no, the shaft etc do not interchange.
Many Thanks! |
|
|
