|
| 1970 25hp evirude flywheel |
| Author |
Message |
    
lee kirkland
New member
Username: seanymph67
Post Number: 1
Registered: 08-2009
| | Posted on Tuesday, August 04, 2009 - 09:34 pm: | 
|
What flywheel/s will work on a 1970 25hp evinrude?
I have a 1973 20hp and a 1961 18 hp, will any of these 2 work? thanks. |
william g moore jr
Advanced Member
Username: william_m
Post Number: 428
Registered: 05-2009
| | Posted on Wednesday, August 05, 2009 - 07:47 pm: |
|
Think you out of luck as the weights may be different.(use a baking scale) You should see if the magnetos will fit and the taper is 80% contact with the crankshaft (use grinding compound and check for pattern)
I would best bet on the 20 hp if it had mags. If solid state- no won't work unless the 25 had the same system. Also find TDC and check the key location. That has to be the same in relation to the magnets. |
|
|
