|
| Can my 6hp Evinrude LS tiller be conv... |
| Author |
Message |
    
Steven Steingruebl
Member
Username: sgruebs870
Post Number: 14
Registered: 07-2007
| | Posted on Tuesday, August 04, 2009 - 02:25 pm: | 
|
Hello everyone, I have a question that I despeately need answered. I'm curious if my 6hp Evinrude LS tiller can be converted to accomidate throttle and steering cables and maybe electric start (electric start is not a big deal though)? I purchased a 6' x 14' pontoon that did not come with an outboard and I was hoping to attach my 6hp Evinrude and use it to putt around my 250 acre lake. The pontoon originally came with a 1995 Evinrude LS 9.9 4 stroke, the owner just took the motor and left the steering, throttle, shift and battery cables. Is this conversion possible with the cables I have or will I have to get different ones or will I need to purchase a totally different outboard??? I would hate to have to spend a ton of money on a new motor. Any info you can supply me with will be GREATLY appreciated. The attached photo is the actual outboard I own. Thanks!!!!
 |
Jim Warner
Member
Username: jim18611865
Post Number: 51
Registered: 07-2007
| | Posted on Wednesday, August 05, 2009 - 03:21 pm: |
|
What year is that engine? I am looking at the 1973 catalog, and the 9.5 and the 6 had remote controls available. Yours looks a little newer. |
william g moore jr
Advanced Member
Username: william_m
Post Number: 427
Registered: 05-2009
| | Posted on Wednesday, August 05, 2009 - 07:40 pm: |
|
These guys running this forumn (MarineEngine) have the casting that bolts to the engine cover bucket. Your cable end will have to have the push pin in the ends. It's #0380293. You might want to look it over and see if it will work???? |
|
|
