| Author |
Message |
    
chuck wray
New member
Username: coolerzfull
Post Number: 1
Registered: 07-2009
| | Posted on Thursday, July 30, 2009 - 05:42 pm: | 
|
i have a few old Johnson Seahorse I was wounder if anyone knows about them.
#1 Is a Johnson Seahorse 3hp Model # JW10 Serial# 1048198
#2 Is a Johnson Seahorse Model # HS15 LT10 Serial# 385254
#3 Is a Johnson Seahorse Model # HS15 Serial # 38407
#4 Is a Johnson Seahorse Model # HS15 Serial # 38400
#5 Is a Johnson Seahorse 10hp I couldn't find a plate on this at the time.
#6 Is a Johnson Seahorse Model 6RL768 Serial # J4509998
#7 Is a Johnson Model CD20R Serial # 2367362
Any help would be grateful. If you know a ball park value also would be great. |
Bob Caskey
Advanced Member
Username: bobbyc
Post Number: 440
Registered: 10-2007
| | Posted on Thursday, July 30, 2009 - 06:00 pm: |
|
Those model numbers can be looked up on this site...click on "engine parts" at the top of the heading page. Ebay is the best source for the values... |
chuck wray
New member
Username: coolerzfull
Post Number: 2
Registered: 07-2009
| | Posted on Thursday, July 30, 2009 - 11:16 pm: |
|
I did try there but all of them came up No Match Found. It only goes from 1968 to 2009. I know one on the motors is a 1952 3hp. |
JacksOldOutboards
Advanced Member
Username: piperjak
Post Number: 147
Registered: 04-2009
| | Posted on Friday, July 31, 2009 - 12:34 am: |
|
It is hard to say what the price is because it all depends if someone really wants those particular motors. Condition is important. Pristine motors sell pretty good - but a run of the mill motor will bring the usual - what somebody is willing to pay. I have never bought a motor that was as good as I thought it was after I opened it up. So, It is hard to say because there is really no way of knowing. It is a crap shoot unless you know the history of the motor and how well it was taken care of. I have an old JW-10 and it is fun - but I doubt it would bring much. I would say you might average $150 for the lot - but I don't know their condition so it is all a guess. Good luck! |
Cliff Casavant
Member
Username: chickenfry
Post Number: 47
Registered: 05-2009
| | Posted on Friday, July 31, 2009 - 11:21 am: |
|
Look at the link below we have a comprehensive id chart.
http://www.marineengine.com/parts/john_model_guide_pre80.html |
chuck wray
New member
Username: coolerzfull
Post Number: 3
Registered: 07-2009
| | Posted on Friday, July 31, 2009 - 09:22 pm: |
|
Thank you all! Cliff, That link showed everyone of them and dates. What a great help. |
