| Author |
Message |
    
Robert Copeland
New member
Username: sledhead67
Post Number: 1
Registered: 07-2009
| | Posted on Wednesday, July 29, 2009 - 08:13 pm: | 
|
1967 Johnson 80hp super sea-horse, I need torque specs on the head bolts and the spark plug gap please |
Joe Reeves
Senior Member
Username: joereeves
Post Number: 7734
Registered: 02-2001
| | Posted on Wednesday, July 29, 2009 - 09:13 pm: |
|
18 to 20 foot pounds. Plug gap is .030.
Torque sequence is:
9...10
5....6
1....2
4....3
8....7
Thousands of parts in my remaining stock. Not able to list them all. Let me know what you need and I'll look it up for you. Visit my eBay store at:
http://stores.ebay.com/Evinrude-Johnson-Outboard-Parts-etc?refid=store |
Robert Copeland
New member
Username: sledhead67
Post Number: 2
Registered: 07-2009
| | Posted on Monday, August 03, 2009 - 06:43 pm: |
|
1967 80hp johnson super sea-horse points gap. cylinders 2 and 4 don't seem to want to fire. can't figure out why. have good compression and fuel. |
Joe Reeves
Senior Member
Username: joereeves
Post Number: 7757
Registered: 02-2001
| | Posted on Monday, August 03, 2009 - 10:05 pm: |
|
Two sets of points. One set fires the starboard bank, the other set fires the port bank.
Wire missing that connects the two sets of points? Points need cleaning with either lacquer thinner or acetone. One set of points not set properly...... set on high lobe so that a .020 gauge will pass thru but a .022 will not.
Thousands of parts in my remaining stock. Not able to list them all. Let me know what you need and I'll look it up for you. Visit my eBay store at:
http://stores.ebay.com/Evinrude-Johnson-Outboard-Parts-etc?refid=store |
