| Author |
Message |
    
gordon mcdonald
Member
Username: sticky
Post Number: 78
Registered: 10-2008
| | Posted on Saturday, July 18, 2009 - 07:11 am: | 
|
hi all,looking at diagram in manual,it is showing springs and cork gaskets going into powerhead adapter first,i thought you slide corks down on t stats,input please,thanx yall |
charles harris
Advanced Member
Username: cehmass
Post Number: 592
Registered: 09-2007
| | Posted on Saturday, July 18, 2009 - 11:17 am: |
|
 |
gordon mcdonald
Member
Username: sticky
Post Number: 79
Registered: 10-2008
| | Posted on Sunday, July 19, 2009 - 10:17 am: |
|
so what is the cork going to do |
charles harris
Advanced Member
Username: cehmass
Post Number: 599
Registered: 09-2007
| | Posted on Sunday, July 19, 2009 - 10:26 am: |
|
it shows thermo in spacer then cork then gasket.
i think i had the same problem when i did mine .
i ended up putting the cork in the spacer then thermo/gasket,the older kit that was in prior had rubber seals that fit around the thermo forming a seal at the spacer and gasket. |
gordon mcdonald
Member
Username: sticky
Post Number: 80
Registered: 10-2008
| | Posted on Sunday, July 19, 2009 - 11:14 am: |
|
well will it work like the diagram shows |
