| Author |
Message |
    
Tim Slice
New member
Username: deadtreejohnson
Post Number: 1
Registered: 07-2009
| | Posted on Friday, July 17, 2009 - 08:54 am: | 
|
need help bad
starter fuse had blown long time back.
now having problems with starting turn the key nothing i check the fuse not blown then engine starts. then after time turn key nothing tighten all starter/solenoid nuts checked wires on harness then it cranks wait a while nothing jiggle wires on side of engine at main connection it cranks could it be the igntion switch HELP driving me crazy |
Lee Roeder
Advanced Member
Username: roederll
Post Number: 171
Registered: 04-2008
| | Posted on Friday, July 17, 2009 - 09:53 am: |
|
Make sure all the wires going to key switch are tight first. |
Tim Slice
New member
Username: deadtreejohnson
Post Number: 2
Registered: 07-2009
| | Posted on Sunday, July 19, 2009 - 08:35 pm: |
|
i've tighten all the switches even replaced the part of wire harness and now engine will crank but now engine will not run wide open runs good at 4500rpm's spits and sputters at 5000rpm's |
