| Author |
Message |
    
peter m clarke
Member
Username: baitfish
Post Number: 5
Registered: 07-2009
| | Posted on Thursday, July 16, 2009 - 01:14 pm: | 
|
When I had the carb rebuilt and replaced a coil last year,I noticed there was water in the lower unit when we replaced the gear oil.I presume this is a seal-is that really complicated and best left for a professional -or something a guy can do with a set of wrenches? |
JacksOldOutboards
Advanced Member
Username: piperjak
Post Number: 120
Registered: 04-2009
| | Posted on Thursday, July 16, 2009 - 01:38 pm: |
|
not that tough. take it slow and ask along the way - should allow you to do it without much trouble. |
Joe Reeves
Senior Member
Username: joereeves
Post Number: 7682
Registered: 02-2001
| | Posted on Thursday, July 16, 2009 - 03:44 pm: |
|
Yep, what Jack said. Rocket science mentality not required. |
