| Author |
Message |
    
Michael
Member
Username: marineman43
Post Number: 19
Registered: 06-2009
| | Posted on Tuesday, July 14, 2009 - 12:24 pm: | 
|
Does anyone know the steps to take to change the water pump impeller?
Do I need it in Forward gear and how to unhook the shifter. |
VicS
Advanced Member
Username: vics
Post Number: 597
Registered: 05-2008
| | Posted on Tuesday, July 14, 2009 - 12:58 pm: |
|
Oh that old! as described by Tashasdady on iBoats then! |
Bob Caskey
Advanced Member
Username: bobbyc
Post Number: 422
Registered: 10-2007
| | Posted on Tuesday, July 14, 2009 - 01:34 pm: |
|
Serial number?? Year??? Some of the older motors require powerhead removal to undo the shifter...later models do not and on those motors, the shift connector is accessed after the lower unit is dropped...I believe 1967 and later do not require removal |
Ella Lanier
New member
Username: ella
Post Number: 1
Registered: 07-2009
| | Posted on Tuesday, July 14, 2009 - 05:19 pm: |
|
I am also trying to change a water pump impeller on Mod # E6RLETB , an Evinrude from the 80's or 90's. It was built in Belgium. My repairman needs help to get into the place where the impeler is. One of the bolts has the head broken off. Any advice would be so helpful. |
jwbmarine
Senior Member
Username: jwbmarine
Post Number: 4644
Registered: 11-2005
| | Posted on Tuesday, July 14, 2009 - 06:36 pm: |
|
that one,believe,u put it in forward,to remove gearcase...either f or reverse,cant rem,..i think,forward. |
