| Author |
Message |
    
Steven J. Frey
Member
Username: cedarlaker506
Post Number: 13
Registered: 03-2009
| | Posted on Monday, July 13, 2009 - 06:13 pm: | 
|
Hi, How many turns out should the Lean/Rich needle screw be for starting before fine tuning? 1976 Johnson 9.9hp |
charles harris
Advanced Member
Username: cehmass
Post Number: 586
Registered: 09-2007
| | Posted on Monday, July 13, 2009 - 07:10 pm: |
|
research a little more look for a post by joe reeves he gives detailed instructions for those engines.in this area you may have to go into the arcive,unless he jumps in on this one. |
jwbmarine
Senior Member
Username: jwbmarine
Post Number: 4633
Registered: 11-2005
| | Posted on Monday, July 13, 2009 - 08:59 pm: |
|
turn it out,about 1.25 turns....then,adj,usually ,towards leaner,to the right...... |
|
