| Author |
Message |
   
ian radburn
Member Username: fishingconi
Post Number: 28 Registered: 12-2008
| | Posted on Sunday, July 12, 2009 - 12:14 pm: |
|
hi i have a 30hp electric start for some reason it has stoped pumping water it was working ok till i tried it this morning no water coming out of rubber tube any ideas i thought impeller where is the impeller on this engine and how hard is it to check & replace if needed regards ian |
   
jwbmarine
Senior Member Username: jwbmarine
Post Number: 4612 Registered: 11-2005
| | Posted on Sunday, July 12, 2009 - 12:41 pm: |
|
USE a piece of wire,weedeater string,toothpic,etc,to clear the plastic nipple on discharge hose...if eng is overheating,..replace wtr impeller. |
   
Joe Reeves
Senior Member Username: joereeves
Post Number: 7657 Registered: 02-2001

| | Posted on Sunday, July 12, 2009 - 12:54 pm: |
|
The water pump is located/bolted directly on top of the lower unit. Thousands of parts in my remaining stock. Not able to list them all. Let me know what you need and I'll look it up for you. Visit my eBay store at: http://stores.ebay.com/Evinrude-Johnson-Outboard-Parts-etc?refid=store |
   
ian radburn
Member Username: fishingconi
Post Number: 29 Registered: 12-2008
| | Posted on Sunday, July 12, 2009 - 02:27 pm: |
|
thank you for responding i tried a piece of strimmer gut and pushed it right in as far as i could. that solved the problen thank god i thought it was going to be costly |