| Author |
Message |
    
Jeff verdone
Member
Username: scubadoo
Post Number: 27
Registered: 06-2008
| | Posted on Saturday, July 11, 2009 - 10:13 am: | 
|
how can I tell if I spun the hub on the prop |
charles harris
Advanced Member
Username: cehmass
Post Number: 576
Registered: 09-2007
| | Posted on Saturday, July 11, 2009 - 12:07 pm: |
|
try the old 2x4 trick ,jam the prop with the wood,and get a good socket on the flywheel and crank,if the prop shaft turns without the prop its spun. or just mark it with a good paint marker and take it for a ride if the lines dont match its spinning. |
dale clark
New member
Username: challenger300
Post Number: 2
Registered: 07-2009
| | Posted on Sunday, July 12, 2009 - 10:44 am: |
|
I have the same engine, I just posted and wondered if you can help with my query. Thanx, Hope your problem is fixed. |
|
