|
| 88 hp evinrude water pump removal |
| Author |
Message |
    
dennis jarrell
Member
Username: coach_j
Post Number: 15
Registered: 06-2009
| | Posted on Tuesday, July 07, 2009 - 11:36 pm: | 
|
ok i know these things can be a little hard to remove, but i cant seem to get this thing to move a hair, just how much force is to much |
Joe Reeves
Senior Member
Username: joereeves
Post Number: 7630
Registered: 02-2001
| | Posted on Wednesday, July 08, 2009 - 01:01 am: |
|
What year is that 88hp, and what problem are you having? |
dennis jarrell
Member
Username: coach_j
Post Number: 16
Registered: 06-2009
| | Posted on Wednesday, July 08, 2009 - 09:46 am: |
|
it's a 1993 evinrude, i cant seem to get the impeller to slide up off the shaft to replace it |
Joe Reeves
Senior Member
Username: joereeves
Post Number: 7640
Registered: 02-2001
| | Posted on Wednesday, July 08, 2009 - 10:05 am: |
|
Normally, placing a large punch, chisel, block of wood, something, between the impeller blades, then hitting it with a good size hammer breaks that impeller loose from the plastic retaining key and driveshaft.
If not, then you'll need to cut away a portion of the rubber impeller and split the impeller hub with a chisel.
Thousands of parts in my remaining stock. Not able to list them all. Let me know what you need and I'll look it up for you. Visit my eBay store at:
http://stores.ebay.com/Evinrude-Johnson-Outboard-Parts-etc?refid=store |
|
|
