|
| 18hp starter solenoid location |
| Author |
Message |
   
Gordon L. Todd
Member Username: gtodd
Post Number: 6 Registered: 05-2009
| | Posted on Thursday, July 02, 2009 - 11:45 am: |
|
I'm adding an electric start to my 69 Fastwin and am a little confused as to where the solenoid is mounted. The parts manual shows the solenoid, sleeve and bracket. Replacement solenoids have built in mounting brackets. Did the original mount inside the cowling on the motor? I'm guessing the later solenoids mount outside somewhere in a junction box. Thanks to anyone who can clear this up. |
   
Joe Reeves
Senior Member Username: joereeves
Post Number: 7569 Registered: 02-2001

| | Posted on Thursday, July 02, 2009 - 12:29 pm: |
|
Tight quarters inside the engine cowling. Simply mount the solenoid anywhere out of the weather, then run the length of the wires/cables accordingly. |
|
|