| Author |
Message |
    
Gregory W Cook
Member
Username: gcook
Post Number: 27
Registered: 08-2007
| | Posted on Thursday, July 02, 2009 - 09:45 am: | 
|
I replaced my trim motor which was not working. Now I am only getting power off the power distribution panel when i hit the down button. nothing on the up. I swithed the relays and the problen was the same. If anybody has any ideas. |
Morten Ringvold
Senior Member
Username: haffiman37
Post Number: 3871
Registered: 04-2006
| | Posted on Thursday, July 02, 2009 - 10:05 am: |
|
'Now I am only getting power off the power distribution panel when i hit the down button.'
Are You talking about the button on the lower side engine cover or on the remote control?
The button on the side covers fails as frequent as the spark plugs on Fichts. As a button test, just switch the blue and green and see if it 'works. If Tilt now works the other way, a button failure. Or if You have a Volt meter, check output from Green resp Blue when pressing button. Keep the red connected! |
Gregory W Cook
Member
Username: gcook
Post Number: 28
Registered: 08-2007
| | Posted on Thursday, July 02, 2009 - 10:26 am: |
|
I was refering to where the blue and green come of the power distributtion panel that leed to the trim motor. |
Morten Ringvold
Senior Member
Username: haffiman37
Post Number: 3873
Registered: 04-2006
| | Posted on Thursday, July 02, 2009 - 10:42 am: |
|
If the buttons on the cover or remote handle does not work, relay will not kick in.
Does both relays 'klick' when buttons are pressed up or down? (Only one at the time). |
Gregory W Cook
Member
Username: gcook
Post Number: 29
Registered: 08-2007
| | Posted on Thursday, July 02, 2009 - 10:55 am: |
|
I think only one works up or down. Do both switches have to work in order for one to work? |
