| Author |
Message |
    
Jared Kaup
New member
Username: fordtec
Post Number: 1
Registered: 06-2009
| | Posted on Tuesday, June 30, 2009 - 02:24 pm: | 
|
Buddy of mine gave me his dad's old boat a couple weeks ago. Got it fired up and ordered a waterpump. Tool bolts out of l/u but it wont drop down. Is there anything to be taken loose to release the driveshaft from up top? I seem to be missing a critical step. |
jwbmarine
Senior Member
Username: jwbmarine
Post Number: 4544
Registered: 11-2005
| | Posted on Tuesday, June 30, 2009 - 07:20 pm: |
|
----disc shift rod------- |
charles harris
Advanced Member
Username: cehmass
Post Number: 562
Registered: 09-2007
| | Posted on Tuesday, June 30, 2009 - 07:31 pm: |
|
its under the carbs |
jwbmarine
Senior Member
Username: jwbmarine
Post Number: 4547
Registered: 11-2005
| | Posted on Tuesday, June 30, 2009 - 07:33 pm: |
|
not on a 67 40,its not,...its on the side. |
william g moore jr
Advanced Member
Username: william_m
Post Number: 232
Registered: 05-2009
| | Posted on Tuesday, June 30, 2009 - 09:17 pm: |
|
Ya starboard side under a 2 bolt cover. Then another cover under that one. Undo the bottom bolt and it should slide free. |
Jared Kaup
New member
Username: fordtec
Post Number: 2
Registered: 06-2009
| | Posted on Wednesday, July 01, 2009 - 09:23 am: |
|
Got it done last night. Sorry forgot to mention electric shift. Just routed wires down and gave a bit of a tug and shaft came out. Thanks for the replies. Now on to the transom replacement! |
