|
| Author |
Message |
    
JacksOldOutboards
Advanced Member
Username: piperjak
Post Number: 104
Registered: 04-2009
| | Posted on Tuesday, June 30, 2009 - 09:31 am: | 
|
Should the prop nut be tight to hold pressure on shear pin or slightly loose. I would think tight? |
Joe Reeves
Senior Member
Username: joereeves
Post Number: 7548
Registered: 02-2001
| | Posted on Tuesday, June 30, 2009 - 11:14 am: |
|
Tight, then back up to closest cotter pin hole if necessary.
Thousands of parts in my remaining stock. Not able to list them all. Let me know what you need and I'll look it up for you. Visit my eBay store at:
http://stores.ebay.com/Evinrude-Johnson-Outboard-Parts-etc?refid=store |
JacksOldOutboards
Advanced Member
Username: piperjak
Post Number: 105
Registered: 04-2009
| | Posted on Tuesday, June 30, 2009 - 12:52 pm: |
|
Ok,,, appreciate it.. !! |
|
|
