|
| 1982 Johnson 50 CDII no spark |
| Author |
Message |
    
Timothy McKenna
New member
Username: timmckenna
Post Number: 1
Registered: 06-2009
| | Posted on Monday, June 29, 2009 - 02:29 pm: | 
|
I get no spark
I did the tests I could from the Seloc Coles book. The wiring harness is good, only 3 years old.
I unplugged the big red plug.
The switch is not grounded
The input and output resistances on the ignition coils are fine.
The resistance on the sensor and charger coils are fine and neither is shorted.
I've kept this baby running for 23 years so when I called for help from Monahans marine and Russo, my Boston service people that I used years ago, I was shocked that they will no longer even look at something so old.
I'm thinking try an new power pack and rectifier. Maybe there's an open somewhere. I have no desire to pull the flywheel |
charles harris
Advanced Member
Username: cehmass
Post Number: 556
Registered: 09-2007
| | Posted on Monday, June 29, 2009 - 03:56 pm: |
|
they dont service older units but they sell the parts,i can give you some names of some that do
maybe a good drive from jp ,slips capeway marine
long pond marine,then there is sammy at the starlight motel in wareham , he specializes in old smaller stuff,have you done a stator output test.there is another guy up near the abagail adams neiborhood in weymouth near church st |
Timothy McKenna
New member
Username: timmckenna
Post Number: 2
Registered: 06-2009
| | Posted on Monday, June 29, 2009 - 05:20 pm: |
|
I have a call in to the guy in Weymouth, Max I think
How do you do a stator test |
charles harris
Advanced Member
Username: cehmass
Post Number: 558
Registered: 09-2007
| | Posted on Monday, June 29, 2009 - 05:23 pm: |
|
you need a good volt/ohm meter check voltage output/(ohms)resistance.you must have a book,
,kept it running that long.or you will need one,
its too much to typ. |
|
|
