| Author |
Message |
    
Stanley Ellison
New member
Username: stanley_ellison
Post Number: 1
Registered: 06-2009
| | Posted on Thursday, June 25, 2009 - 11:40 pm: | 
|
Is there an alternate way go arrive at the model number?
Serial # hard to see; may be e0062646 |
jwbmarine
Senior Member
Username: jwbmarine
Post Number: 4528
Registered: 11-2005
| | Posted on Sunday, June 28, 2009 - 02:56 pm: |
|
yep,..look on the port-left,stern baracket,for a tag...many of those plugs,only carried the seriel number,which is useless for eng id. |
tigershark
Member
Username: tigershark
Post Number: 12
Registered: 06-2009
| | Posted on Thursday, July 02, 2009 - 06:28 pm: |
|
check the core plug on the motor. It should have either the model number or serial number. If it has the serial number call BRP and give them the number and they can tell you what the model number is. |
nicknack2
Advanced Member
Username: nicknack2
Post Number: 212
Registered: 08-2008
| | Posted on Thursday, July 02, 2009 - 11:59 pm: |
|
Tigershark, where is the core plug located??? |
tigershark
Member
Username: tigershark
Post Number: 13
Registered: 06-2009
| | Posted on Friday, July 03, 2009 - 11:57 am: |
|
It should be on top of the cylinder block. A small round plug (Its a freeze plug). Check the right side of the engine if you are facing the motor from behind.
There should be a number stamped into the plug. Reply back with that number |
