| Author |
Message |
    
timothy wayne jones
New member
Username: tim_jones
Post Number: 1
Registered: 05-2008
| | Posted on Thursday, May 15, 2008 - 11:38 pm: | 
|
Ive change THE POWERPACK and still no fire to plugs i need help please |
jwbmarine
Senior Member
Username: jwbmarine
Post Number: 1527
Registered: 11-2005
| | Posted on Friday, May 16, 2008 - 07:32 am: |
|
that new of an eng,i highly doubt,u have elect prob's under flywheel,...but.....they should be ck'ed...now,disc blk/yellow wire and crank,ck spark. |
ikia
Visitor
| | Posted on Friday, May 16, 2008 - 09:10 am: |
|
You are using the ignition " killswitch " properly??? |
timothy wayne jones
New member
Username: tim_jones
Post Number: 2
Registered: 05-2008
| | Posted on Monday, May 19, 2008 - 04:48 pm: |
|
my kill switch has two yellow/black wires so witch one do i unplug one gos to key switch and the other gos to wireing harnes |
ikia
Visitor
| | Posted on Monday, May 19, 2008 - 04:51 pm: |
|
The circuit is " open " for the engine to run. |
timothy wayne jones
New member
Username: tim_jones
Post Number: 3
Registered: 05-2008
| | Posted on Monday, May 19, 2008 - 09:07 pm: |
|
my kill switch has two black/yellow wires so witch one do i unplug |
jwbmarine
Senior Member
Username: jwbmarine
Post Number: 1580
Registered: 11-2005
| | Posted on Tuesday, May 20, 2008 - 07:45 am: |
|
either one..one is a ground.....the other is connected to pack blk/yell.
----* disc blk/yellow near pwr pack and crank to see if u have fire now-----if so,prob up front,if not,prob w/eng. |
