stevehendo34
New member
I am having water quickly getting into oil but running fine.
1. Can one bypass cooling to the exhaust manifold and riser run on some cups out of the water to eliminate the manifolds and risers somehow?
2. Any usual place the blocks crack other than under the exhaust manifolds?
3. Any troubleshooting tips other than just looking @ parts?
Mercruser 898
http://www.madisonnet.net/mercruser.jpg
4. If I replace the motor with a 5.7 truck engine what Marine Gasket would I want to put in the truck motor?
5. What years motor should I look for?
1. Can one bypass cooling to the exhaust manifold and riser run on some cups out of the water to eliminate the manifolds and risers somehow?
2. Any usual place the blocks crack other than under the exhaust manifolds?
3. Any troubleshooting tips other than just looking @ parts?
Mercruser 898
http://www.madisonnet.net/mercruser.jpg
4. If I replace the motor with a 5.7 truck engine what Marine Gasket would I want to put in the truck motor?
5. What years motor should I look for?
Last edited: