no spark need help on stator!

[chris90hp]

hello i have a 90hp mariner not sure on year maybe 1989 ? serial number-0C265517 is all i can find on my engine last year on the water id lose spark intermittently
when id shut it off it would not start again sometimes. i cant find the right diagrams for this motor i checked the trigger tested -good replaced cdi box still no spark
i wanted to check my stator but seems to have a different set of wires theres no red wire going to switch box only a blue wire no sure how to test this stator

 

[haventaclue]

The number is coming up as '93. Link to parts diagram https://www.marineengine.com/parts/mariner-outboard-parts/90-3-cyl/0c222000-thru-0d283221-usa

 

[chris90hp]

The number is coming up as '93. Link to parts diagram https://www.marineengine.com/parts/mariner-outboard-parts/90-3-cyl/0c222000-thru-0d283221-usamy question is how to you test the stator when theres only a blue lead to switch box there is no red lead also how did you determine the year

 

[chris90hp]

bump

 

[chris90hp]

Hello guys took my flywheel off found magnets broken and what not I have a spare parts engine I took the fly wheel off that and two magnets are lose is there a special glue to keep them on ?

 

[amenkart2023]

Chris90HP,
Were the magnets glued on originally?
See 0431929 - Epoxy Adhesive Kit, GROUND SHIP ONLY
That is a Johnson/Evinrude kit, but should be similar.
Andrew

 

[chris90hp]

Chris90HP,
Were the magnets glued on originally?
See 0431929 - Epoxy Adhesive Kit, GROUND SHIP ONLY
That is a Johnson/Evinrude kit, but should be similar.
Andrew

i fixed the magnets and put on another stator but i still have no spark i can find anything to help me on the

 

[haventaclue]

Check the kill circuit. If it has a mercury tilt switch, disconnect it.

 

[chris90hp]

Check the kill circuit. If it has a mercury tilt switch, disconnect it.

me and my buddy did check the tilt switch it is working i saw on some other pages to try and disconnect the harnesss and jump the starter i was thinking about trying that i really need a manual for this thing

 

[chris90hp]

found a wire to the rectifier that was burned replaced connector and it fired up

 

[amenkart2023]

Glad to hear it!