Need Propeller Shaft for Hurth V-Drive an Mercruiser 454

[searay310]

Does anybody know where to buy a new 1 1/4 prop shaft for a Hurth V-Drive with a Merc. 454. The boat is a Sea Ray 310Da 1990yr.
Can´t find any Dealer in Germany.
Best Regards,
Darius
searay310

 

[Bt Doctur]

shafting is not specific to the trans or motor.you just need a 1 1/4 shaft x length

 

[searay310]

shafting is not specific to the trans or motor.you just need a 1 1/4 shaft x length

Yes I know. Do you have any good and fast working companies where to buy the shaft? In Germany I only get metric sizes which i cannot use.
searay310

 

[Bt Doctur]

31.8 mm is the same as 1 1/4 . Actual size can vary a bit,all you need is the taper for the prop.Coupler can be machined to accept a slightly larger shaft.
Can also redrill the new coupler to match holes on engine coupler. As long as it fits thru the shaft log you should be ok.

 

[guyjg]

try this company http://bpi.ebasicpower.com/index.php