Need a chrysler 318 block

[BMT4387]

Looking for a chrysler 318 block from the 1970s for my 1975 century buccaneer. If any one knows places online or in michigan it would help out a lot. Thanks

 

[greasemonkey]

72 fresh water Closed cooled block from single housboat,stripped to bare block,rust bored 30 over,magnafluxed for cracks(none) drain plugs removed,cam bearing punched out,bare block ready for final hone and new pistons,

all the internals


heat exchanger with aluminium tube stripped cleaned out like I said fresh water cooled

Set of brand new log mannys never had water run thru...was rigged for drystack exhaust pipe and magnaflow muffler custom made to fit chrysler marine manifolds

The story is he rebuilt this crazy boat in hopes of having a minitug with a pilot house ,went to turn it over,locked up sat next to the house

Paid 200 for machine work ready to see it move

 

[RicardoMarine]

Looking for a chrysler 318 block from the 1970s for my 1975 century buccaneer. If any one knows places online or in michigan it would help out a lot. Thanks

Since you are looking for a block only, try a search for "Engine Rebuilder Supply" in your area.
There must be several of them.



http://www.google.com/#hl=en&sclien....,cf.osb&fp=c46529590d2197e8&biw=1510&bih=863

 

[daves69]

check mopar clubs in MI

http://www.bing.com/search?FORM=IE8SRC&q=++mopar+car+clubs+michigan&src=IE-SearchBox


check the forums, many times folks will actually give good older blocks away or sell really cheap just to make room and keep them from the scrap man.

maybe you can score a stalled project block

 

[cci1]

I have an early '70s 318 short block, unknown history; ran when last shut down, turns free. Contains crank, rods, pistons w/rings, RH cam. Engine s/n was 120502. $200; located Orlando, FL. Email [email protected]