Logo

Honda 200 drop to limp mode after 25 minutes of running.

LIMP mode is 1800 RPM. Only two things cause it. 1. Overheat whereby the engine will shut down after 20 seconds of sensing an overheated condition. 2. Low oil pressure, in which case the engine will continue to run in LIMP.

If you have four indicator lights on your switch console, pull codes. The first attachment tells you how to pull codes. The second attachment tells you what the codes mean.
 

Attachments

  • Procedure for Getting Fault Codes.pdf
    189.6 KB · Views: 7
  • MIL Fault Codes Scanned.pdf
    85.1 KB · Views: 6
Back
Top