Logo

Help with ignition switch

gary

Regular Contributor
" We have a Starcraft DLX SC w

" We have a Starcraft DLX SC with a Mariner 25 hp
When attaching the wires to the ignition switch according to the manual:
Black = M1
Black/Yellow = M2
Red = B
Purple = A
Yellow/Black = C
Yellow/Red = S
And nothing. The switch does work....the console was taken apart to recover. The switch itself is a little hard to read going clock wise, starting at the noon position we have :
12 - M
1 - B
4 - M
7 - S, or it might be I, not sure on this
9 - A
and center - C. The switch also has the push in for choke. Any help would greatly be appreciated .....we are going nuts trying to get this to run!! "
 
" It seems like you have it al

" It seems like you have it all connected right. Now go to the engine and check the fuse. you may have blown it when connecting, if you did not disconnect the battery before you started work. "
 
Just wanted to say thanks! Y

Just wanted to say thanks! You were exactly right .....the fuse on the motor was blown. Everything works fine now. Thanks again ....without the advice we'd probably still be struggling.
 
Back
Top