Brandyn.norwood
New member
I was out the other day and when I put the engine full throttle it was binding up real bad, upon further investigation I found the linkage for the oil pump snapped off and the linkage was catching on wires and fuel lines and the engine was stuck at full throttle. So I putted in on one motor and ordered a new oil pump. Once I replaced the pump and start the engine, it immediately goes full throttle no matter what the throttle angle is. I have checked all of the throttle linkage, nothing is binding, and everything moves as advertised. So now I am lost at what's wrong. Has anyone experienced this problem? Or know any solutions? The motor is a 2000 Yamaha ox66 saltwater series 150, many thanks in advanced for any help