Force 150 timing

[gambler1960]

"What is the correct timing fo

"What is the correct timing for a 1992 Force 150?, and how do I set it out of the water??
Any help would be greatly appreciated.
Thanks"

 

[sheriff251]

"Timing is 32 BTDC, static or

"Timing is 32 BTDC, static or 30 BTDC,dynamic. Out of the water you would use the static setting."

 

[sheriff251]

I checked my 50hp Force by rem

I checked my 50hp Force by removing the spark plugs and grounding them to the engine. Very important to ground them. Let them hang on the attached plug wires. Install the timing light prob to the #1 cyl plug wire. Place the remote control into forward gear and advance to WOT. Jump out the neutral safety switch if so equipted and spin the engine over with the starter. Check the timing and make any adjustment necessary.