Flushing a 90hp four stroke in the water

[wijames]

I have a 30' pontoon with a 90hp four stroke on it. I have to keep it in the water and am wondering how I should flush the engine. Any suggestions?

Thanks
Butch

 

[chawk_man]

Butch, send me an e-mail at [email protected] and I will send you a picture and brief write-up of a system I rigged up to handle that problem. Basically you install a T connector in the flush port hose and run a hose from that T to a transom mount and terminate that hose with an on/off valve and a quick disconnect from a garden hose. Maybe 15 dollars in parts and about a half hour of labor.