A friend gave me a 6 horsepower 1976 Evinrude motor. I got it working yesterday in a trash can full of water, but when I put it back away I heard something rattling in the case. It looks to be a small plastic cam that engages with a plastic piece on the flywheel, and is probably related to the pull start mechanism? Picture below.
https://drive.google.com/file/d/0B5P6vanem_36SllOV214UWFfcG8/view?usp=drivesdk
https://drive.google.com/file/d/0B5P6vanem_36ZVE2UW9WN1ZGMW8/view?usp=drivesdk
Is this part necessary? If so what's the proper orientation? I noticed that the cam lever that comes up from below has a hex bolt orientation, so there's probably a right and wrong way to align it...
https://drive.google.com/file/d/0B5P6vanem_36SllOV214UWFfcG8/view?usp=drivesdk
https://drive.google.com/file/d/0B5P6vanem_36ZVE2UW9WN1ZGMW8/view?usp=drivesdk
Is this part necessary? If so what's the proper orientation? I noticed that the cam lever that comes up from below has a hex bolt orientation, so there's probably a right and wrong way to align it...