Logo
FULL SITE MENU

BF 225 fuel filters and screens

C

chawk_man

Silver Medal Contributor
As I posted earlier, I had my 2007 BF 225 with 1,950 hours in the shop over the winter for a 400 hour maintenance, plus some other stuff. I had them go through and change out ALL of the fuel filters and screens. It's always been a mystery to me about many of these filters and screens because several are not addressed in Chapter 3 (Maintenance) of the Helm Shop Manual. So below, is what I think is a comprehensive list with part numbers. Hope this helps out folks in the future.

• LP fuel filter 16901-ZY3-003
• HP fuel filter screen 16911 ZY3-010
• Fuel Pump Filter 16911-759-003 (on top of VST)
• Suspension strainer 16915-ZW5-000 (over top of fuel pump filter)
• Fuel Pump Insulator 16718-ZY6-013
• Fuel filter mesh 16614-P5G-003

Note: Fuel filter mesh 16614-P5G-003 is on the fuel rail. Item #4 as shown at…

http://www.boats.net/parts/search/H...er/BF225AK0 XCA/FUEL PIPE INJECTOR/parts.html
 
I didn't get the old parts from the folks that did the work. I usually do, but this time I was pressed for time and forgot to ask. Sorry 'bout that.
 
You covered that one well chawk. The 16911-759-003 (on top of VST) can be easily missed because its in between the engine block and intake manifolds and hangs vertically.
 
Back
Top