AQ151C / Weber 32/36 DGV conversion - jets?

[Paul McClure]

Hi, can anyone tell me what jets work well for the above combination? The engine idles OK until it gets up to temperature, then floods and dies and won't restart until it cools down again.

 

[thostorey]

Paul, are you certain that you have the electric choke properly connected? A cold engine is fully choked and the choke opens progressively. I believe I have the choke hot lead connected to the +ve side of the coil and the choke body grounded to complete the circuit. If you don't get an answer here try Bud Paugy ([email protected]) He can tell you what jet you should have installed in that engine. Also remember that the Weber carb does not like too many fuel psi. I have a pressure restrictor installed set to 3psi and it works well.

Tom