2014 Mariner 30 ELPT

[Soundssoft]

A little guidance please on a 2014 model year Mercury Marine Mariner 30hp ELPT Serial Number OR644111.

I’ve swopped out the impeller but can’t for the life of me find model specific torque settings for the five bolts, four up and one down that attach the gearcase to the drive shaft housing or four the four bolts which secure the plastic/nylon impeller cover. Any pointers would be much appreciated.

 

[mechanicman]

For the impeller cover. Use a 1/4 ratchet set. Tighten all snug. Then just slight of a 1/4 turn.

For the lower unit. Tighten all snug then use a wrench for the bolts visible and Tighten tight. Don't over due it. I
I don't have the specs. But if you've ever Tightened a nut or bolt. You know when to stop . I hope.

Maybe someone else has the proper specs