NateZilla420
New member
New poster to the forum here... I have gone through the ringer on this, bottom cylinder not firing? I can unplug the bottom cylinder spark plug wire and idle does not change; unplug the top cylinder plug wire and the motor kills. It has new ignition coils, spark plug wires, and plugs, NEW SWITCH BOX(which I thought was the fix for sure), new fuel filter, new impeller and water pump kit, AND fresh lower unit oil change... When the motor is in forward it will not ramp up to full power, seems to bog through the water(probably the 1 cylinder’s power) In reverse gear the motor seem to be able to rev all the way up to full rpm. Could there have been a switch in re-attaching the shifter linkage causing the motor to only rev when in forward-to the reverse gear’s maximum rpm’s? Is that a thing!? I’m lost. Any advice/ direction would be greatly appreciated!