polariskid13
New member
hey all new to the forum, so yesterday went fishing and crusing at 30mph engine starts making a scraching sound,, no good our speed is slowly dropin to 25 mph then noise gets louder, stop check plugs and the right bottom cylinder plug had metal shavings on the top (N) we continue to run it,, shoiuld have stopped noise gets louder and warning buzzer comes on. BEEEEEEEP........BEEEEEEEP..........BEEEEEEP just trying to figure which code that is, no oil or overheat. the engine was pumping water out the tell tale fine the beep came after we pumped the oil bulb so we were thinking an air bubble? but it started b4 that. anyway got home all cyliders have 130-140 psi except one with metal shaving which has zero?? sad day as it was an amazing engine just have a few questions like is it ok to replace one piston and bore it out or do all have to be done do to imbalance? and which beeper is that b/c it happened once last year but it was BEEEP BEEP BEEEP continuous not long and paused then it ran fine for 2 weeks. so any help on to what happened would be appriciated ,,we took the oil out at end of season if that means anythin but always have and refilled full this season it was not low oil as it was full