compton1963
New member
I have a 1978 Monarch Aluminum Bass Boat, The wiring harness that goes from the motor to the remote has dry rotted. I have replaced the harness and was in the middle of changing the ignition switch when I realized on the drawing I have the 7 pin plug. I have a white wire that goes to the igntion switch. However the engine side of the harness has no pin and now where for the white wire to go. The drawings show the same thing. I am stumped on what to do next. I am thinking I am going to have to bypass the plug/ harness in some way and route the white wire elsewhere. But I definitely need some help. PLease advise