Logo

1977 Evinrude 70hp will not start

ceostrongatl

New member
My motor will not start. It was starting fine, then nothing.

  • The battery is fully charged
  • It cranks when I jump the solenoid, so I replaced it, and it still doesn' start
  • The only thing that happens is the choke opens and closes when I turn the key. Yes, I push the key all the way in.
 
Neutral start switch in control box.-----Or ground wire from solenoid to the block.
I will check the ground wire, again. I believe I reconnected the ground wire correctly when I changed the solenoid.
I don't know how I can check the neutral switch in the control box, tho. I checked the handle to make sure it's in neutral. It is.
I'll reply tomorrow after I check the wiring. Thanks.
 
Back
Top