July 4th, had family over and my brother wanted to hear the engines, (Crusaders 350). Sounded good but after the starboard engine quit for unknown reasons, I restarted it and a couple of times fired up and quit. Then (oh no) the gagues went bezerk and then nothing. Port engine died at this time. Neither engine would crank. After awhile, I troubleshot the engine and wow! the batter cable was melted. Removed the starter, had it rebuilt, and ready to reinstall it. Question is, does the electric for both engines run through the 50A breaker on the starboard engine. It also shut down one of the circuits for the interior DC. Had to jump the dead circuit to the operating one. Also, had to remove everything from the rear of the engine to access the starter.
Thanks