Logo
FULL SITE MENU

10 or 30 micron racors

F

fireman79

New member
"89 454 crusaders w/carbs and

"89 454 crusaders w/carbs and mech. fuel pumps...I'm going to bulkhead mount 90 gph racors next week, (putting them before the fuel pumps) but I don't know if they are 10 or 30 micron filters, and I'm worried about what Jeff said about them clogging, in a earlier discussion about adding fuel/water separaters... (if they are 10 micron filters) Is there any way to find out? Please advise..."
 
"If you are so concerned about

"If you are so concerned about the filters clogging, why install them? If they are clogging, they are doing their job. Just service them on a regular basis and there is no problem."
 
.."Just service them on a

.."Just service them on a regular basis and there is no problem."

Until the motor starves for gas and holes a piston!

Use 30 to 40 micron BEFORE the fuel pump and 10 microns after it and all will be well.

Jeff
 
Back
Top