Timiming chrysler 85hp

"Hello I have a 1975 chrysler

"Hello I have a 1975 chrysler 85 horse that I think needs to be timed I just wanted to know what the procedure was for this.

thanks, will"

"Disconnect and ground all you

"Disconnect and ground all your plug wires (must ground them to the block or you can ruin electrical components),

Disconnect the neutral switch, I just wrap a piece of wire or tape around it to depress the switch (microswitch under the throttle tower),

Connect timing light to #1 cylinder,

Advance throttle control to WOT,

Have someone turn the key so the starter spins the motor and check the timing while it is spinning.

Stop, Adjust, Recheck

Set to 2 degrees less and it should be right on when it is actually running."