Logo

Wiring

  • Thread starter mark somerville
  • Start date
M

mark somerville

Guest
"i am working on a 85 hp chrys

"i am working on a 85 hp chrysler force,on the coil an cdi side of the motor ,there is a black wire with a yellow stripe ,i am not sure what screw that this wire gets hooked under on the power block ,if anyone has info ,that would be great thanks for your time"
 
"Mark, that black and yellow w

"Mark, that black and yellow wire should be coming from your cdi box that you would connect on the opposite side beside your starter, where there should be an other wiring board. If you have two cdi box's, put both black and yellow wires together on the same bolt for grounding."
 
Try connecting it on the third

Try connecting it on the third or fourth from the top right of this groung board that seats beside the starter. Their all ground wires.
Good luck
 
Back
Top