Logo
FULL SITE MENU

Rochester 2bbl on 30L

M

mkpj1

Guest
I have a 3.0L with a 2bll Roch

I have a 3.0L with a 2bll Rochester that is drippig fuel onto the throttle plates making it hard to start unless I go WOT. It's running rich as well.

Anybody have the float setting for this carb. I saw Troy's info on the Mercarb but is there any on the rochester. Seems like the same problem?

Thanks in advance.
Ken
 
"You need a Rebuild Kit,......

"You need a Rebuild Kit,......

It'll have the Parts,+ Instructions,+ Settings in it......"
 
"(I just rebuilt my Mercar

"(I just rebuilt my Mercarb so...)

The Mercarb spec should probably apply to you since they modeled it after the Rochester carb. I guess they used Rochester carbs for a while and then for whatever reason brought it in house. If I recall correctly from repair manual, I think the only real difference is the Mercarb has one idle mixture screw and the Rochester has two."
 
Back
Top