Logo
FULL SITE MENU

Reverse problem

W

wreckdiver

New member
"270 stern drive, works great

"270 stern drive, works great forwards but when put into reverse it seems to be only partly engaging, the duo props seem to be spiining put give it more throttle and the engine revs but very little power. Any suggestions?
Greg"
 
It looks like the reverse clut

It looks like the reverse clutch is slipping. Try adjusting the shift cable and see if that makes any difference.
 
"Adjustments are made where wi

"Adjustments are made where with the cable, from inside by the throttle? I have not looked yet but I will tonight. It is in the water.
Regards Greg"
 
"The adjustment is done in the

"The adjustment is done in the outdrive. Remove the outdrive cover, then remove the cotterpin 40 and adjust cube 39 as needed.

http://www.dougrussell.com/partscatalog/volvo_omc/index.cfm?fuseaction=comp&grou p=3450&GroupList=3432,3433,3434,3435,3436,3437,3438,3439,3440,3441,3442,3443,344 4,3445,3446,3448,3447,3449,3450,3451,3452,3453,3454,3455,3456,3457,3458,3459,346 0,3461,3462,3463

Also, make sure the control cable sleeve is secured to the outdrive (tab 37 is in place and screw 36 is tight) and that the control cable moves forward and aft when shifting."
 
I have a 1985 Volvo Penta 280.

I have a 1985 Volvo Penta 280. It will go in reverse fine out of the water but in the water it doesn't go be every blue moon.
What do I need to look at or adjust?
 
Back
Top