Logo

Pre alpha outdrive compatability with alpha 1

"I have a 1977 470 outdrive. W

"I have a 1977 470 outdrive. Will the alpha 1 lower end bolt up to the upper half of a pre alpha outdrive? Also is there a trick to getting the lower half of the pre alpha lower end apart? I have a bearing out on the upper end, But I can not get the lower unit apart???"
 
"1 nut at the front, 2 nuts at

"1 nut at the front, 2 nuts at fwd. above ventilation plate. 2 nuts below vent. pl. above prop. 1 bolt under trim tab zinc. could stick a little on alignment pins, foreward, and aft. yes alpha will fit, but not gen2."
 
Back
Top