Logo

125 Force lost power

billbrowder

New member
" I have a 1991 Force 125hp th

" I have a 1991 Force 125hp that has always run great and now has no power under a load. It will only get to about 4000 rpm and takes forever to get on plane.It has no trouble running on the flush hose, but sucks under load. I suspect a compression issue and will check that tomorrow. Any suggestions?

Bill "
 
just checked the compression

just checked the compression and as I suspected
#4 has none at all. Any one want to take a shot at what that might cost to repair?
 
" First thing is first, If you

" First thing is first, If you have to split the block you are looking about a grand. Pistons (after market to prevent any future problems) new rings and everything else that you should change. I just went through the whole process on mine. E-mail me and lets talk "
 
Billbrowder... Odds are it is

Billbrowder... Odds are it isn't worth spending the money on. They dont't make that motor anymore and never will. Best bet is to start shopping for a new motor. From my experiences in the past its the best way to go sorry
 
Back
Top