Logo
FULL SITE MENU

Outboard crank shaft rebuild

S

sherman

New member
I wanted to buy a new crank f

I wanted to buy a new crank for a 115 hp Evinrude but at over 1000 bucks I now intend to repair the crank I have if it can be done. I has a small flake out of one of the rod bearing journels about 1/8 by 3/16 inch and about 1/32 deep.

Any advice would help

Sherm
 
" An outboard crankshaft is a

" An outboard crankshaft is a PRECISION item. Some shops try to repair them but i have seen the results (bent shafts ,not concentric ).In short it is a waste of money. Find a good used crank there are lots of them around and reasonably priced. "
 
" Sherman,

A properly rebui

" Sherman,

A properly rebuilt crank usually goes for about half the price of a new one. I have used quite a few and have had no problems so far, but I have no idea where they came from. My parts guy does not divulge the sources that he uses.

Tony "
 
Back
Top