Logo
FULL SITE MENU

Removing milky oil

B

bethelduck

Guest
I had a blown head gasket ER-

I had a blown head gasket ER-GO milky oil .How can i flush the system and get all the water out. 1959 OWENS 283c.i. with 44 hrs on rebuild . head gasket leaked between #1 and#3 cylinders
 
" I had the same problem last

" I had the same problem last week. While trying to suck the oil out of the dipstick hole without much luck due to the cold,thick (even with the added water)oil someone suggested adding a gallon of mineral spirits to the mix. It thinned the oil to the point that I was able to remove it with no trouble. Make sure that you get the tranny too. "
 
I had water in one of my engi

I had water in one of my engines. Changed the oil a couple of times while it was HOT. I changed it a third time hot a week after adding some Marvel Mystery Oil. Then I removed the rocker covers and cleaned out the goo that was not removed by the procedure above. No signs of water since.

Matt B.
 
Back
Top