Bjsmith919
Regular Contributor
I've got a 2013 Sea Hunt Gamefish 27 with dual F200xca's that the tilt and trim stopped working on. Both solenoids click but motors will not move, have tried the switches on each motor, at throttle control that controls both motors and the individual switch at throttle control. All I get is a click, voltage at solenoids don't change whether under load or not, 13.5v. Tried touching blue and green wire to red on solenoids and nothing happens but with green and blue wires where they are supposed to be on the solenoid and I use a jumper wire I get a low hum but nothing happens. I've exhausted mine and youtubes knowledge. Both worked last time I used the boat and I don't see both solenoids going out at the same time but anything can happen. Anybody have an idea of what I have going on? Any help would be greatly appreciated.